Rack Mount Power Strips
Tevelec carries a wide range rack mount power strip products. We have mountable server rack power strips that distribute power throughout your rack. Our rack mount power strips are available in different configurations and sizes. We also have PDU strips that you can mount in horizontal or vertical. Our rack mount power strips have circuit breakers to prevent damage caused by current overloading.
We also distribute server power strips that have built-in surge suppression to give protection on all 3 AC modes: Neutral to Ground, Line to Neutral, and Line to Ground. Our power trips are specifically designed to safely distribute power to your equipment.
Horizontal Rack Mount Outlet Strips
15 Amp Outlet Strips with FRONT-Mounted Receptacles
CSA certified, Standards C22.2 (No. 21-95, No. 42-99 and No. 8-M1986)
UL recognized, Standards UL1363, UL1449 and UL1283 – file # E166039
15 Amp Outlet Strips with FRONT AND REAR-Mounted Receptacles
CSA certified, Standards C22.2 (No. 21-95, No. 42-99 and No. 8-M1986)
UL recognized, Standards UL1363, UL1449 and UL1283 – file # E166039
15 Amp Outlet Strips with REAR-Mounted Receptacles
CSA certified, Standards C22.2 (No. 21-95, No. 42-99 and No. 8-M1986)
UL recognized, Standards UL1363, UL1449 and UL1283 – file # E166039
15 Amp Outlet Strips with 90 Degree Offset Receptacles
CSA certified, Standards C22.2 (No. 21-95, No. 42-99 and No. 8-M1986)
UL recognized, Standards UL1363, UL1449 and UL1283 – file # E166039
20-Amp Outlet Strips with FRONT OR REAR-Mounted Receptacles
15 Amp and 20-Amp Outlet Strips with built-in AMMETER
- Unit includes easy to read 0.37” high red LED ammeter (1.38” x 0.88” display).
- Ammeter accuracy +/- 0.1 Amps
The 1583 series (15 Amp. version) are cURus recognized to Standard UL1363 – file # E166039
The 1589 series (20 Amp. version) are cULus listed to Standard UL1363 – file # E166039.
Vertical Rack Mount Outlet Strips
Rack system vertical outlet strips are available in 15 Amp, 20 Amp and 15 Amp with Surge Protection.
All feature:
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- Black or Silver (Natural)
- Finish as specified
Each Vertical Outlet Strip includes a mounting clip kit containing necessary hardware required to mount a vertical outlet strip to a server rack cabinet, amhal struts or open relay racks.
Additional kits can be purchased by ordering Part No. 1585CLIP
When mounting to DC200 series use Part No. DC2PBCLP
Surge Specifications
- 12,000 Amp rated MOV’s.
- Maximum 36,000 Amps transient current and 780 Joules.
- 400V UL1449 suppressed voltage rating.
- Protection in all 3 AC modes, L-N, N-G and L-G.
- Voltage suppression at the outlet guards against transients from equipment on the power bar.